 |
$ 1.87-2.99
100 Pieces
his is 1 sets of power connectors to light fixtures. And The wiring harness for LED off road lights is the perfect accessory for off road vehicles, working vehicles, and any automobile.
Feature:
-12V 5PIN Illuminated on/off switch
-12V 40A Power Relay
-30A Blade Fuse
-Comes with relay module box, wiring harness w/ adapters, safety fuse box, and LED light bar on/off rocker switch
Description of switch:
LED:BLUE
Mechanical Life:20000 times
is_customized:Yes
size of drill:37.2*21.2mm
IP Rating:IP68
certification:CE
electric Strength:AC 1500V 1minute
Operating Temperature:-25degree to 80degree
Electrical Life:10000 make and break cycles at full load
Fitment: Suitabale for all automobiles and devices equipped with a 12 Volt DC power source.
Package Included: 1 set wiring harness with LED light bar on/off rocker switch (show as the picture)
Installation: (Just for reference)
1. connect the the red+ wire from the fuse to battery +; connect the black wire from the reply to the battery -;
2. connect the wire for lights bar from the relay; (red/black correspond to the wire of lights bar)
3. connect the red +/black- wire of the switch to battery or any place of your car system to get power for the switch
4. turn on on/off button of switch to test the lights bar
Product Content:
1 x Wiring Harness
1 x ROCKER SWITCH ON/ OFF switch
Related Products
his is 1 sets of power connectors to light fixtures. And The wiring harness for LED off road lights is the perfect accessory for off road vehicles, working vehicles, and any automobile.
Feature:
-12V 5PIN Illuminated on/off switch
-12V 40A Power Relay
-30A Blade Fuse
-Comes with relay module box, wiring harness w/ adapters, safety fuse box, and LED light bar on/off rocker switch
Description of switch:
LED:BLUE
Mechanical Life:20000 times
is_customized:Yes
size of drill:37.2*21.2mm
IP Rating:IP68
certification:CE
electric Strength:AC 1500V 1minute
Operating Temperature:-25degree to 80degree
Electrical Life:10000 make and break cycles at full load
Fitment: Suitabale for all automobiles and devices equipped with a 12 Volt DC power source.
Package Included: 1 set wiring harness with LED light bar on/off rocker switch (show as the picture)
Installation: (Just for reference)
1. connect the the red+ wire from the fuse to battery +; connect the black wire from the reply to the battery -;
2. connect the wire for lights bar from the relay; (red/black correspond to the wire of lights bar)
3. connect the red +/black- wire of the switch to battery or any place of your car system to get power for the switch
4. turn on on/off button of switch to test the lights bar
Product Content:
1 x Wiring Harness
1 x ROCKER SWITCH ON/ OFF switch
Related Products
